Rev 19 | Blame | Compare with Previous | Last modification | View Log | RSS feed
# AVR32 Toolchain Makefile
#
# Copyright (C) 2012 by Jasmin Jessich <jasmin.jessich@frequentis.com>
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
# THE SOFTWARE.
#
# This Makefile is based on the one from here:
# https://github.com/jsnyder/avr32-toolchain/blob/master/Makefile
# Copyright (C) 2011 by James Snyder <jbsnyder@fanplastic.org>
#
###############################################################################
#
# The origial version couldn't handle delta building of parts, which is
# required during patch development. I didn't want to fix all the different
# make steps seperately. So I decided to use an new approach, which I never
# tried before. I used make macros to generate the different rules for the
# different tools.
# This saved me a lot of work, when a new tool is added. Moreover, bugfixes
# have to be done only one place. Enhancments of the targets need to be done
# on only one place.
# The drawback of this approach is a little mor complexity when writing shell
# scripts within the make macro. You need a lot of '$' for escaping.
#
# I have tested most of the targets with a lot of compinations, but there might
# one which is not working. Please send me a bug report, if you find such a
# combination.
#
# The development SVN repository can be found at
# http://web.anw.at/websvn/listing.php?repname=avr32-toolchain
#
# NOTE: Currently ONLY binutils is finished!
#
###############################################################################
#### PRIMARY TOOLCHAIN VERSIONS #####
GCC_VERSION = 4.4.3
GDB_VERSION = 6.7.1
GDB_VERSION_DLOAD = $(GDB_VERSION)a
#BINUTILS_VERSION = 2.20.1
BINUTILS_VERSION = 2.22
NEWLIB_VERSION = 1.16.0
DFU_VERSION = 0.5.4
AVR_PATCH_REV = 3.2.3.261
AVR_HEADER_REV = 3.2.3.258
#### PATHS AND ENVIRONMENT VARIABLES #####
SHELL = /bin/bash
TARGET = avr32
TODAY = $(shell date "+%Y%m%d")
GIT_REV = $(shell git rev-parse --verify HEAD --short 2> /dev/null)
SVN_REV = $(shell head -1 ReleaseNotes 2> /dev/null | cut -f 1 -d " ")
PREFIX_RELEASE ?= /opt/avr/avr32-tools
ifeq ($(strip $(GIT_REV)),)
ifeq ($(strip $(SVN_REV)),)
PREFIX ?= $(HOME)/avr32-tools-$(TODAY)
TOOL_REV = $(TODAY)
else
PREFIX ?= $(HOME)/avr32-tools-$(SVN_REV)
TOOL_REV = $(SVN_REV)
BUG_URL = jasmin@anw.at
endif
else
PREFIX ?= $(HOME)/avr32-tools-$(GIT_REV)
TOOL_REV = $(GIT_REV)
endif
ifeq ($(UNAME), Linux)
PROCS ?= $(shell grep -c ^processor /proc/cpuinfo)
else ifeq ($(UNAME), Darwin)
PROCS ?= $(shell sysctl hw.ncpu | awk '{print $$2}')
else
PROCS ?= 2
endif
RELEASE_VERSION ?= no
PREFIX_RELEASE ?= /opt/avr/avr32-tools
ifneq ($(RELEASE_VERSION),no)
FULL_STATIC = y
PREFIX = $(PREFIX_RELEASE)-$(RELEASE_VERSION)
endif
# enable complete static linking
FULL_STATIC ?= no
# enable maintainer-mode with yes
M_MODE ?= no
# enable binutils autotool file regeneration with yes
BINUTILS_REGEN ?= no
SUPP_PREFIX = $(CURDIR)/supp
PATH := ${PREFIX}/bin:${SUPP_PREFIX}/bin:${PATH}
AUTOCONF = $(SUPP_PREFIX)/bin/autoconf
AUTOMAKE = $(SUPP_PREFIX)/bin/automake
STAMP_DIR := $(CURDIR)/stamps
DOWNLOAD_DIR := $(CURDIR)/downloads
BUILD_DIR := $(CURDIR)/build
ifeq ($(strip $(BUG_URL)),)
BUG_URL = https://github.com/jsnyder/avr32-toolchain
endif
#PKG_VERSION ?= "AVR 32 bit GNU Toolchain-$(AVR_PATCH_REV)-$(TOOL_REV)"
PKG_VERSION ?= "AVR 32 bit GNU Toolchain-$(TOOL_REV)"
#### PRIMARY TOOLCHAIN URLS #####
GCC_ARCHIVE = gcc-$(GCC_VERSION).tar.bz2
GCC_URL = http://mirror.anl.gov/pub/gnu/gcc/gcc-$(GCC_VERSION)/$(GCC_ARCHIVE)
GCC_MD5 = fe1ca818fc6d2caeffc9051fe67ff103
GDB_ARCHIVE = gdb-$(GDB_VERSION_DLOAD).tar.bz2
GDB_URL = http://mirror.anl.gov/pub/gnu/gdb/$(GDB_ARCHIVE)
GDB_MD5 = 3564f308f3e4d4f2750891bc2ce9b214
BINUTILS_ARCHIVE = binutils-$(BINUTILS_VERSION).tar.bz2
BINUTILS_URL = http://mirror.anl.gov/pub/gnu/binutils/$(BINUTILS_ARCHIVE)
# V 2.20.1
#BINUTILS_MD5 = 2b9dc8f2b7dbd5ec5992c6e29de0b764
# V 2.22
BINUTILS_MD5 = ee0f10756c84979622b992a4a61ea3f5
NEWLIB_ARCHIVE = newlib-$(NEWLIB_VERSION).tar.gz
NEWLIB_URL = ftp://sources.redhat.com/pub/newlib/$(NEWLIB_ARCHIVE)
NEWLIB_MD5 = bf8f1f9e3ca83d732c00a79a6ef29bc4
AVR32PATCHES_ARCHIVE = avr32-gnu-toolchain-$(AVR_PATCH_REV)-source.zip
AVR32PATCHES_URL=http://www.atmel.com/dyn/resources/prod_documents/$(AVR32PATCHES_ARCHIVE)
AVR32PATCHES_MD5 = 69a03828a328068f25d457cfd8341857
install_dir_avr32patches := source/avr32
NEWPATCHESBINUTILS_ARCHIVE = binutils-2.22-avr32-full.patch
NEWPATCHESBINUTILS_URL=http://avr.anw.at/avr32/patches/binutils/2_22/$(NEWPATCHESBINUTILS_ARCHIVE)
NEWPATCHESBINUTILS_MD5 = 09c091b9acb369fd39fb21d0334bb9a6
install_dir_newpatchesbinutils := source/avr32/binutils
AVR32HEADERS_ARCHIVE = avr32-headers-$(AVR_HEADER_REV).zip
AVR32HEADERS_URL=http://www.atmel.com/dyn/resources/prod_documents/$(AVR32HEADERS_ARCHIVE)
AVR32HEADERS_MD5 = 3293d70a46e460d342e1f939b8e0d228
DFU_ARCHIVE = dfu-programmer-$(DFU_VERSION).tar.gz
DFU_URL = http://surfnet.dl.sourceforge.net/project/dfu-programmer/dfu-programmer/$(DFU_VERSION)/$(DFU_ARCHIVE)
DFU_MD5 = 707dcd0f957a74e92456ea6919faa772
##### SUPPORT TOOLS VERSIONS / URLS ######
AUTOCONF_VERSION = 2.64
#AUTOMAKE_VERSION = 1.11
AUTOMAKE_VERSION = 1.11.1
LIBTOOL_VERSION = 2.2.6b
DEJAGNU_VERSION = 1.5
MPC_VERSION = 0.8.1
AUTOCONF_ARCHIVE = autoconf-$(AUTOCONF_VERSION).tar.bz2
AUTOCONF_URL = http://mirror.anl.gov/pub/gnu/autoconf/$(AUTOCONF_ARCHIVE)
AUTOCONF_MD5 = ef400d672005e0be21e0d20648169074
AUTOMAKE_ARCHIVE = automake-$(AUTOMAKE_VERSION).tar.bz2
AUTOMAKE_URL = http://mirror.anl.gov/pub/gnu/automake/$(AUTOMAKE_ARCHIVE)
# V 1.11
#AUTOMAKE_MD5 = 4db4efe027e26b33930a7e151de19d0f
# V 1.11.1
AUTOMAKE_MD5 = c2972c4d9b3e29c03d5f2af86249876f
LIBTOOL_ARCHIVE = libtool-$(LIBTOOL_VERSION).tar.gz
LIBTOOL_URL = http://mirror.anl.gov/pub/gnu/libtool/$(LIBTOOL_ARCHIVE)
LIBTOOL_MD5 = 07da460450490148c6d2df0f21481a25
DEJAGNU_ARCHIVE = dejagnu-$(DEJAGNU_VERSION).tar.gz
DEJAGNU_URL = http://mirror.anl.gov/pub/gnu/dejagnu/$(DEJAGNU_ARCHIVE)
DEJAGNU_MD5 = 3df1cbca885e751e22d3ebd1ac64dc3c
SUPP_TOOLS := autoconf automake libtool
SUPP_TOOLS_TEST := dejagnu
ALL_TOOLS := gcc gdb binutils newlib avr32patches avr32headers dfu \
newpatchesbinutils \
$(SUPP_TOOLS) $(SUPP_TOOLS_TEST)
all: install-cross
############ MACROS for the lazy people ;-) ############
## in silent mode (make -s),, print whats ging on
ifeq ($(strip $(MAKEFLAGS)),s)
define quiet_text
@echo "$1"
endef
else
define quiet_text
endef
endif
## the stamp name
define name_stamp
$(STAMP_DIR)/$(1)
endef
## remove a stamp
define rm_stamp
rm -f $(STAMP_DIR)/$(1)
endef
## remove all stamps
define rm_stamps
rm -f $(STAMP_DIR)/*-$(1)
endef
## create the stamp directory if not existing and the stamp
define make_stamp
@[ -d $(STAMP_DIR) ] || mkdir $(STAMP_DIR)
date > $(STAMP_DIR)/$(1)
endef
## delete empty directories
define del_empty-directories
@find . -type d -empty -not -path "*.git*" -not -path "*.svn*" -delete
endef
## delete all empty directories
## need to do this several times to remove all empty sub directories
define del_all_empty-directories
$(call del_empty-directories)
$(call del_empty-directories)
$(call del_empty-directories)
$(call del_empty-directories)
$(call del_empty-directories)
endef
## to make the following macros more simply, we need the variables
## with the tool name in lowercase. I could have changed the original
## definition, but I don't want to break the make convention of upper
## case definitions for such user defined variables.
define LOWER_TOOL_VARS
UP_$(1) := $(shell echo "$(1)" | tr '[a-z]' '[A-Z]')
$(1)_VERSION := $$($$(UP_$(1))_VERSION)
$(1)_ARCHIVE := $$($$(UP_$(1))_ARCHIVE)
$(1)_URL := $$($$(UP_$(1))_URL)
$(1)_MD5 := $$($$(UP_$(1))_MD5)
endef
$(foreach tool,$(ALL_TOOLS),$(eval $(call LOWER_TOOL_VARS,$(tool))))
## create the download rule and force download rule
define DOWNLOAD_template
download-$(1): $(DOWNLOAD_DIR)/$$($(1)_ARCHIVE)
download-$(1)-f $(DOWNLOAD_DIR)/$$($(1)_ARCHIVE):
[ -d $(DOWNLOAD_DIR) ] || mkdir -p $(DOWNLOAD_DIR)
cd $(DOWNLOAD_DIR) && curl -LO $$($(1)_URL)
download-$(1)_TEXT := "Removing $(DOWNLOAD_DIR)/$$($(1)_ARCHIVE)"
download-$(1)-remove:
$(call quiet_text,$$(download-$(1)_TEXT))
rm -f $(DOWNLOAD_DIR)/$$($(1)_ARCHIVE)
available_targets += download-$(1) download-$(1)-f download-$(1)-remove
PHONY += download-$(1) download-$(1)-f download-$(1)-remove
endef
## extract commands
EXT_BZ2 := tar -jxf
EXT_TGZ := tar -xf
EXT_ZIP := unzip -o
## create the extract rule and force extract rule
define EXTRACT_template
$(1)_extract_cmds ?= $($(2)) $$< $(3)
extract-$(1)_TEXT := "Extracting $$($(1)_ARCHIVE)"
extract-$(1): $(call name_stamp,extract-$(1))
extract-$(1)-f $(call name_stamp,extract-$(1)): $(DOWNLOAD_DIR)/$$($(1)_ARCHIVE)
@(rm -rf $(1)-*; \
t1=`openssl md5 $$< | cut -f 2 -d " " -` && \
[ "$$$$t1" = "$$($(1)_MD5)" ] || \
( echo "Bad Checksum! Please remove the following file and retry: $$<" && false ))
$(call quiet_text,$$(extract-$(1)_TEXT))
$$($(1)_extract_cmds)
$(call make_stamp,extract-$(1))
extract-$(1)-remove:
rm -rf $(1)-*
$(call rm_stamp,extract-$(1))
clean_extract_$(1)_rule := extract-$(1)-remove
available_targets += extract-$(1) extract-$(1)-f extract-$(1)-remove
PHONY += extract-$(1) extract-$(1)-f extract-$(1)-remove
endef
## create the patch rule
define PATCH_template
$(1)_patch_level ?= -p0
patch-$(1)_TEXT := "Patching $$($(1)_ARCHIVE)"
patch-$(1): $(call name_stamp,patch-$(1))
$(call name_stamp,patch-$(1)): $(call name_stamp,extract-$(1)) $(call name_stamp,extract-avr32patches) \
$(call name_stamp,extract-newpatchesbinutils)
$(call quiet_text,$$(patch-$(1)_TEXT))
@(pushd $(1)-$$($(1)_VERSION) ; \
for f in ../$(install_dir_avr32patches)/$(1)/*.patch; do \
echo "Patching using: $$$${f}" ; \
patch -N $$($(1)_patch_level) --no-backup-if-mismatch -i $$$${f} ; \
if [ $$$$? -ne 0 ] ; then exit -1 ; fi ; \
done ; \
popd)
$(call make_stamp,patch-$(1))
patch-$(1)-remove: extract-$(1)-remove
$(call rm_stamp,patch-$(1))
clean_patch_$(1)_rule := patch-$(1)-remove
available_targets += patch-$(1) patch-$(1)-remove
PHONY += patch-$(1) patch-$(1)-remove
endef
## one rule for all required support tools
install-supp-tools_targets := $(foreach tool,$(SUPP_TOOLS),$(call name_stamp,install-$(tool)))
install-supp-tools: $(install-supp-tools_targets)
clean-supp-tools: $(foreach tool,$(SUPP_TOOLS),clean-$(tool))
available_targets += install-supp-tools clean-supp-tools
PHONY += install-supp-tools clean-supp-tools
## create the regen rule
## it is used to regenerate the auto tools result files
define REGEN_template
regen-$(1)_TEXT := "Regenerate auto tool files for $$($(1)_ARCHIVE)"
regen-$(1): $(call name_stamp,regen-$(1))
regen-$(1)-f $(call name_stamp,regen-$(1)): $(call name_stamp,$(2)-$(1)) \
$(install-supp-tools_targets)
$(call quiet_text,$$(regen-$(1)_TEXT))
@(pushd $(1)-$$($(1)_VERSION) ; \
PATH=$(SUPP_PREFIX)/bin:$$$${PATH} $(SUPP_PREFIX)/bin/autoreconf -v ; \
for dir in $$($(1)_regen_dirs) ; do \
pushd $$$$dir ; \
PATH=$(SUPP_PREFIX)/bin:$$$${PATH} $(SUPP_PREFIX)/bin/autoreconf -v ; \
popd ; \
done; \
popd)
$(call make_stamp,regen-$(1))
regen-$(1)-remove:
$(call rm_stamp,regen-$(1))
clean_regen_$(1)_rule := regen-$(1)-remove
available_targets += regen-$(1) regen-$(1)-f regen-$(1)-remove
PHONY += regen-$(1) regen-$(1)-f regen-$(1)-remove
endef
## create the configure rule and force configure rule
define CONF_template
# we need configure parameters!
ifeq ($$(strip $$($(1)_conf_opts)),)
$$(error "Configure options '$(1)_conf_opts' not defined")
endif
conf-$(1)_TEXT := "Configuring $(1) $$($(1)_VERSION)"
conf-$(1): $(call name_stamp,conf-$(1))
conf-$(1)-f $(call name_stamp,conf-$(1)): $(call name_stamp,$(2)-$(1)) $$($(1)_conf_deps)
@(rm -rf $(BUILD_DIR)/$(1) ; mkdir -p $(BUILD_DIR)/$(1))
$(call quiet_text,$$(conf-$(1)_TEXT))
cd $(BUILD_DIR)/$(1) && \
$$($(1)_conf_env) \
../../$(1)-$$($(1)_VERSION)/configure $$($(1)_conf_opts)
$(call make_stamp,conf-$(1))
conf-$(1)-remove:
$(call rm_stamp,conf-$(1))
clean_conf_$(1)_rule := conf-$(1)-remove
available_targets += conf-$(1) conf-$(1)-f conf-$(1)-remove
PHONY += conf-$(1) conf-$(1)-f conf-$(1)-remove
endef
## create the build rule and force build rule
define BUILD_template
build-$(1): $(call name_stamp,build-$(1))
build-$(1)-f: build-$(1)-clean build-$(1)
# default commands overrideable
$(1)_build_cmds ?= $(MAKE) -j$(PROCS)
$(1)_build_clean_cmds ?= $(MAKE) clean
build-$(1)_TEXT := "Building $(1) $$($(1)_VERSION)"
$(call name_stamp,build-$(1)): $(call name_stamp,conf-$(1))
$(call quiet_text,$$(build-$(1)_TEXT))
cd $(BUILD_DIR)/$(1) && \
$$($(1)_build_env) \
$$($(1)_build_cmds)
$(call make_stamp,build-$(1))
build-$(1)-clean_TEXT := "Cleaning $(1) $$($(1)_VERSION)"
build-$(1)-clean:
$(call quiet_text,$$(build-$(1)-clean_TEXT))
cd $(BUILD_DIR)/$(1) && \
$$($(1)_build_clean_cmds)
$(call rm_stamp,build-$(1))
build-$(1)-remove:
rm -rf $(BUILD_DIR)/$(1)
$(call rm_stamp,build-$(1))
clean_build_$(1)_rule := build-$(1)-remove
available_targets += build-$(1) build-$(1)-f build-$(1)-clean build-$(1)-remove
PHONY += build-$(1) build-$(1)-f build-$(1)-clean build-$(1)-remove
endef
## create the install rule and force install rule
define INSTALL_template
install-$(1)_TEXT := "Installing $(1) $$($(1)_VERSION)"
install-$(1): $(call name_stamp,install-$(1))
install-$(1)-f $(call name_stamp,install-$(1)): $(call name_stamp,build-$(1))
$(call quiet_text,$$(install-$(1)_TEXT))
cd $(BUILD_DIR)/$(1) && \
$(MAKE) install
$(call make_stamp,install-$(1))
uninstall-$(1)_TEXT := "Uninstalling $(1) $$($(1)_VERSION)"
uninstall-$(1):
$(call quiet_text,$$(uninstall-$(1)_TEXT))
[ -f $(BUILD_DIR)/$(1)/Makefile ] && \
[ -f $(call name_stamp,install-$(1)) ] && \
cd $(BUILD_DIR)/$(1) && \
$(MAKE) uninstall || true
$(call rm_stamp,install-$(1))
clean_uninstall_$(1)_rule := uninstall-$(1)
available_targets += install-$(1) install-$(1)-f uninstall-$(1)
PHONY += install-$(1) install-$(1)-f uninstall-$(1)
endef
## create the clean rule and realclean rule
define CLEAN_template
clean-$(1)_TEXT := "Cleaning $(1) $$($(1)_VERSION)"
clean-$(1)-text:
$(call quiet_text,$$(clean-$(1)_TEXT))
clean-$(1): clean-$(1)-text $$(clean_uninstall_$(1)_rule) $$(clean_extract_$(1)_rule) \
$$(clean_patch_$(1)_rule) $$(clean_regen_$(1)_rule) $$(clean_build_$(1)_rule) \
$$(clean_conf_$(1)_rule)
$(call del_all_empty-directories)
clean_rules += clean-$(1)
realclean-$(1): clean-$(1) download-$(1)-remove
$(call del_all_empty-directories)
realclean_rules += realclean-$(1)
available_targets += clean-$(1) realclean-$(1)
PHONY += clean-$(1) realclean-$(1) clean-$(1)-text
endef
############# SUPP: AUTOCONF ############
$(eval $(call DOWNLOAD_template,autoconf))
$(eval $(call EXTRACT_template,autoconf,EXT_BZ2))
autoconf_conf_opts := --prefix="$(SUPP_PREFIX)"
$(eval $(call CONF_template,autoconf,extract))
$(eval $(call BUILD_template,autoconf))
$(eval $(call INSTALL_template,autoconf))
$(eval $(call CLEAN_template,autoconf))
############ SUPP: AUTOMAKE ############
$(eval $(call DOWNLOAD_template,automake))
$(eval $(call EXTRACT_template,automake,EXT_BZ2))
automake_conf_opts := --prefix="$(SUPP_PREFIX)"
# automake needs the new autoconf allready installed
automake_conf_deps := $(call name_stamp,install-autoconf)
$(eval $(call CONF_template,automake,extract))
$(eval $(call BUILD_template,automake))
$(eval $(call INSTALL_template,automake))
$(eval $(call CLEAN_template,automake))
############ SUPP: LIBTOOL ############
$(eval $(call DOWNLOAD_template,libtool))
$(eval $(call EXTRACT_template,libtool,EXT_TGZ))
libtool_conf_opts := --prefix="$(SUPP_PREFIX)"
# libtool needs the new autoconf/automake allready installed
libtool_conf_deps := $(call name_stamp,install-autoconf) \
$(call name_stamp,install-automake)
$(eval $(call CONF_template,libtool,extract))
$(eval $(call BUILD_template,libtool))
$(eval $(call INSTALL_template,libtool))
$(eval $(call CLEAN_template,libtool))
############ SUPP-TEST: DEJAGNU ############
$(eval $(call DOWNLOAD_template,dejagnu))
$(eval $(call EXTRACT_template,dejagnu,EXT_TGZ))
dejagnu_conf_opts := --prefix="$(SUPP_PREFIX)"
# dejagnu needs the new autoconf/automake allready installed
dejagnu_conf_deps := $(call name_stamp,install-autoconf) \
$(call name_stamp,install-automake)
$(eval $(call CONF_template,dejagnu,extract))
$(eval $(call BUILD_template,dejagnu))
$(eval $(call INSTALL_template,dejagnu))
$(eval $(call CLEAN_template,dejagnu))
############# AVR32 PATCHES ############
$(eval $(call DOWNLOAD_template,avr32patches))
$(eval $(call EXTRACT_template,avr32patches,EXT_ZIP))
## use the uninstall-XXX rule to remove the patches directory
PHONY += uninstall-avr32patches
uninstall-avr32patches:
rm -rf $(install_dir_avr32patches)
clean_uninstall_avr32patches_rule = uninstall-avr32patches
$(eval $(call CLEAN_template,avr32patches))
############# NEWPATCHESBINUTILS ############
$(eval $(call DOWNLOAD_template,newpatchesbinutils))
newpatchesbinutils_extract_cmds := \
@([ -d $(install_dir_newpatchesbinutils) ] && \
mv $(install_dir_newpatchesbinutils) $(install_dir_newpatchesbinutils).x ; \
mkdir -p $(install_dir_newpatchesbinutils) ; \
cp $(DOWNLOAD_DIR)/$(NEWPATCHESBINUTILS_ARCHIVE) $(install_dir_newpatchesbinutils) \
)
$(eval $(call EXTRACT_template,newpatchesbinutils))
## use the uninstall-XXX rule to remove the patches directory
PHONY += uninstall-avr32patches
uninstall-newpatchesbinutils:
rm -rf $(install_dir_newpatchesbinutils)
clean_uninstall_newpatchesbinutils_rule = uninstall-newpatchesbinutils
$(eval $(call CLEAN_template,newpatchesbinutils))
############# AVR32 HEADERS ############
$(eval $(call DOWNLOAD_template,avr32headers))
###### FIXME: Need to add a dependency to "stamps/install-final-gcc"
install_path_avr32headers := $(PREFIX)/$(TARGET)/include
avr32headers_unzip_opt := -d "$(install_path_avr32headers)"
$(eval $(call EXTRACT_template,avr32headers,EXT_ZIP,$(avr32headers_unzip_opt)))
## use the uninstall-XXX rule to remove the patches directory
install_dir_avr32headers := $(install_path_avr32headers)/avr32
PHONY += uninstall-avr32headers
uninstall-avr32headers:
rm -rf $(install_dir_avr32headers)
clean_uninstall_avr32headers_rule = uninstall-avr32headers
$(eval $(call CLEAN_template,avr32headers))
################ BINUTILS ################
$(eval $(call DOWNLOAD_template,binutils))
$(eval $(call EXTRACT_template,binutils,EXT_BZ2))
#binutils_patch_level := -p1
$(eval $(call PATCH_template,binutils))
binutils_regen_dirs := bfd opcodes binutils gas ld
$(eval $(call REGEN_template,binutils,patch))
ifneq ($(M_MODE),no)
binutils_maintainer_mode := --enable-maintainer-mode
endif
# do not add a ' ' between after ":="
ifneq ($(BINUTILS_REGEN),no)
binutils_conf_depend :=regen
else
binutils_conf_depend :=patch
endif
binutils_conf_opts := \
$(binutils_maintainer_mode) \
--prefix="$(PREFIX)" --target=$(TARGET) --disable-nls \
--disable-shared --disable-werror \
--enable-ld=yes --enable-gold=no \
--with-pkgversion=$(PKG_VERSION) \
--with-sysroot="$(PREFIX)/$(TARGET)"
# --with-bugurl=$(BUG_URL)
$(eval $(call CONF_template,binutils,$(binutils_conf_depend)))
ifneq ($(FULL_STATIC),no)
binutils_fulls_static := AM_LDFLAGS=-all-static
endif
#binutils_build_cmds := ???
#binutils_build_clean_cmds := ???
binutils_build_env := $(binutils_fulls_static)
$(eval $(call BUILD_template,binutils))
$(eval $(call INSTALL_template,binutils))
$(eval $(call CLEAN_template,binutils))
.PHONY: $(PHONY)
.PHONY: tst
tst:
@echo "PREFIX=$(PREFIX)"
@echo "PKG_VERSION=$(PKG_VERSION)"
@echo "BUG_URL=$(BUG_URL)"
.PHONY: help
help:
@echo ""
@echo "The following targets are available:"
@echo ""
@echo "download-XXX : download the required package"
@echo "extract-XXX : extract the downloaded package"
@echo "conf-XXX : configure the extracted package"
@echo "build-XXX : build the configured package"
@echo "install-XXX : install the build package"
@echo "uninstall-XXX : uninstall the installed package"
@echo "clean-XXX : clean the package source and build tree"
@echo "realclean-XXX : same as clean-XXX, but remove the downloaded"
@echo " package, too"
@echo ""
@echo "XXX can be one of the following:"
@echo "$(ALL_TOOLS)"
@echo "supp-tools"
@echo ""
@echo "The above targets will be executed in the right order and only if"
@echo "they need to be be really built. If you want to rebuild one of them"
@echo "manualy, you can use the aaaa-XXX-f target (e.g.: build-autoconf-f,"
@echo "download-automake-f). Please note, that not all steps are available for"
@echo "all tools (e.g.: install-avr32patches is not available)."
@echo ""
@echo "clean : clean all; execute all clean-XXX rules"
@echo "realclean : same as clean, but remove all downloaded"
@echo " packages, too (execute all realclean-XXX rules)"
@echo ""
@echo "help : this inforamtion"
@echo "helpx : this inforamtion + available targets"
@echo ""
@echo "The installation prefix can be set by"
@echo " PREFIX=.... make aaa-XXX"
@echo "And the package version with"
@echo " PKG_VERSION=\"AVR 32 bit GNU Toolchain-XXX\""
@echo ""
@echo "Build a full static release with"
@echo " RELEASE_VERSION=0.1.0"
@echo "The prefix for the release can changed with"
@echo " PREFIX_RELEASE=/usr/local/avr/avr32-tools"
@echo ""
@echo "Maintainers may use"
@echo " M_MODE=y, BINUTILS_REGEN=y, FULL_STATIC=y"
@echo "Please have a look to the Makefile for details"
@echo ""
# do not remove the empty line, will add the required \n
define print_target
@echo "$(1)"
endef
.PHONY: helpx
helpx: help
@echo "Available targets:"
$(foreach target,$(available_targets),$(call print_target,$(target)))
@echo ""
.PHONY: install-note
install-note: install-tools
@echo ""
@echo "====== INSTALLATION NOTE ======"
@echo "Your tools have now been installed at the following prefix:"
@echo "$(PREFIX)"
@echo
@echo "Please be sure to add something similar to the following to your .bash_profile, .zshrc, etc:"
@echo ' export PATH="$(PREFIX)/bin:$$PATH"'
@echo
.PHONY: install-tools
install-tools: install-binutils
# FIXME: other currently not finished
# install-final-gcc install-newlib install-headers
.PHONY: install-cross
install-cross: install-tools install-note
.PHONY : clean realclean
clean: $(clean_rules)
realclean: $(realclean_rules)
#################################################################
#################################################################
#### ######
#### ######
#### ######
#### FROM HERE ON OLD CODE OF ORIGINAL MAKEFILE ######
#### COMPLETELY UNSUPPORTED AND FOR PATTERN FOR ######
#### ADDITIONAL WORK ONLY ######
#### ######
#### ######
#### ######
#################################################################
#################################################################
############ SUPP: AUTOMAKE ############
##.PHONY: download-automake download-automake-force
##download-automake: downloads/$(AUTOMAKE_ARCHIVE)
##download-automake-force downloads/$(AUTOMAKE_ARCHIVE):
## [ -d downloads ] || mkdir downloads ;
## cd downloads && curl -LO $(AUTOMAKE_URL)
##.PHONY: extract-automake extract-automake-force
##extract-automake: stamps/extract-automake
##extract-automake-force stamps/extract-automake: downloads/$(AUTOMAKE_ARCHIVE)
## @(t1=`openssl md5 $< | cut -f 2 -d " " -` && \
## [ "$$t1" = "$(AUTOMAKE_MD5)" ] || \
## ( echo "Bad Checksum! Please remove the following file and retry: $<" && false ))
## tar -jxf $< ;
## [ -d stamps ] || mkdir stamps ;
## touch stamps/extract-automake;
##.PHONY: build-automake build-automake-force
##build-automake: stamps/build-automake
##build-automake-force stamps/build-automake: stamps/extract-automake stamps/install-autoconf
## mkdir -p build/automake && cd build/automake && \
## ../../automake-$(AUTOMAKE_VERSION)/configure --prefix="$(SUPP_PREFIX)" && \
## $(MAKE) -j$(PROCS)
## [ -d stamps ] || mkdir stamps
## touch stamps/build-automake;
##.PHONY: install-automake install-automake-force
##install-automake: stamps/install-automake
##install-automake-force stamps/install-automake: stamps/build-automake
## cd build/automake && \
## $(MAKE) install
## [ -d stamps ] || mkdir stamps
## touch stamps/install-automake;
##.PHONY: clean-automake
##clean-automake:
## rm -rf build/automake stamps/*-automake automake-*
##.PHONY: realclean-automake
##realclean-automake: clean-automake
## rm downloads/$(AUTOMAKE_ARCHIVE)
############# AVR32 PATCHES ############
##.PHONY: download-avr32patches download-avr32patches-force
##download-avr32patches: downloads/$(AVR32PATCHES_ARCHIVE)
##download-avr32patches-force downloads/$(AVR32PATCHES_ARCHIVE):
## cd downloads && curl -LO $(AVR32PATCHES_URL)
##.PHONY: extract-avr32patches extract-avr32patches-force
##extract-avr32patches: stamps/extract-avr32patches
##extract-avr32patches-force stamps/extract-avr32patches: downloads/$(AVR32PATCHES_ARCHIVE)
## @(t1=`openssl md5 $< | cut -f 2 -d " " -` && \
## [ "$$t1" = "$(AVR32PATCHES_MD5)" ] || \
## ( echo "Bad Checksum! Please remove the following file and retry: $<" && false ))
## unzip -o $<
## [ -d stamps ] || mkdir stamps
## touch stamps/extract-avr32patches;
##.PHONY: clean-avr32patches
##clean-avr32patches:
## rm -rf stamps/*-avr32patches source
##.PHONY: realclean-avr32patches
##realclean-avr32patches: clean-avr32patches
## rm downloads/$(AVR32PATCHES_ARCHIVE)
############# AVR32 HEADERS ############
##.PHONY: download-avr32headers download-avr32headers-force
##download-avr32headers: downloads/$(AVR32HEADERS_ARCHIVE)
##download-avr32headers-force downloads/$(AVR32HEADERS_ARCHIVE):
## cd downloads && curl -LO $(AVR32HEADERS_URL)
##.PHONY: install-headers install-headers-force
##install-headers: stamps/install-headers
##install-headers-force stamps/install-headers: downloads/$(AVR32HEADERS_ARCHIVE) stamps/install-final-gcc
## @(t1=`openssl md5 $< | cut -f 2 -d " " -` && \
## [ "$$t1" = "$(AVR32HEADERS_MD5)" ] || \
## ( echo "Bad Checksum! Please remove the following file and retry: $<" && false ))
## unzip -o $< -d "$(PREFIX)/$(TARGET)/include/" && \
## [ -d stamps ] || mkdir stamps
## touch stamps/install-headers;
##.PHONY: clean-headers
##clean-headers:
## rm -rf stamps/*-headers $(PREFIX)/$(TARGET)/include/avr32
##.PHONY: realclean-headers
##realclean-headers: clean-headers
## rm downloads/$(AVR32HEADERS_ARCHIVE)
################ NEWLIB ################
.PHONY: download-newlib download-newlib-force
download-newlib: downloads/$(NEWLIB_ARCHIVE)
download-newlib-force downloads/$(NEWLIB_ARCHIVE):
[ -d downloads ] || mkdir downloads ;
cd downloads && curl -LO $(NEWLIB_URL)
.PHONY: extract-newlib extract-newlib-force
extract-newlib: stamps/extract-newlib
extract-newlib-force stamps/extract-newlib : downloads/$(NEWLIB_ARCHIVE)
@(t1=`openssl md5 $< | cut -f 2 -d " " -` && \
[ "$$t1" = "$(NEWLIB_MD5)" ] || \
( echo "Bad Checksum! Please remove the following file and retry: $<" && false ))
tar -xf $<
[ -d stamps ] || mkdir stamps
touch stamps/extract-newlib;
.PHONY: patch-newlib patch-newlib-force
patch-newlib: stamps/patch-newlib
patch-newlib-force stamps/patch-newlib: stamps/extract-newlib stamps/extract-avr32patches
pushd newlib-$(NEWLIB_VERSION) ; \
for f in ../source/avr32/newlib/*.patch; do \
patch -N -p0 <$${f} ; \
done ; \
popd ;
[ -d stamps ] || mkdir stamps
touch stamps/patch-newlib;
.PHONY: regen-newlib regen-newlib-force
regen-newlib: stamps/regen-newlib
regen-newlib-force stamps/regen-newlib: stamps/patch-newlib stamps/install-supp-tools
pushd newlib-$(NEWLIB_VERSION) ; \
"$(SUPP_PREFIX)/bin/autoconf"; "$(SUPP_PREFIX)/bin/automake" ; \
for dir in newlib/libc/machine/avr32 newlib/libc/machine newlib/libc/sys/avr32 newlib/libc/sys; do \
pushd $$dir ; \
"$(SUPP_PREFIX)/bin/aclocal" -I ../.. -I ../../.. -I ../../../.. ; \
"$(SUPP_PREFIX)/bin/autoconf"; "$(SUPP_PREFIX)/bin/automake"; \
popd ; \
done; \
popd;
[ -d stamps ] || mkdir stamps
touch stamps/regen-newlib;
NEWLIB_FLAGS="-ffunction-sections -fdata-sections \
-DPREFER_SIZE_OVER_SPEED -D__OPTIMIZE_SIZE__ -g -Os \
-fomit-frame-pointer -fno-unroll-loops -D__BUFSIZ__=128 \
-DSMALL_MEMORY"
.PHONY: build-newlib build-newlib-force
build-newlib: stamps/build-newlib
build-newlib-force stamps/build-newlib: stamps/regen-newlib stamps/install-binutils stamps/install-gcc
mkdir -p build/newlib && cd build/newlib && \
pushd ../../newlib-$(NEWLIB_VERSION) ; \
make clean ; \
popd ; \
../../newlib-$(NEWLIB_VERSION)/configure --prefix=$(PREFIX) \
--with-build-time-tools=$(PREFIX) \
--target=$(TARGET) --disable-newlib-supplied-syscalls \
--disable-libgloss --disable-nls --disable-shared \
--enable-newlib-io-long-long --enable-newlib-io-long-double \
--enable-target-optspace --enable-newlib-io-pos-args \
--enable-newlib-reent-small && \
$(MAKE) -j$(PROCS) CFLAGS_FOR_TARGET=$(NEWLIB_FLAGS) CCASFLAGS=$(NEWLIB_FLAGS) && \
[ -d stamps ] || mkdir stamps
touch stamps/build-newlib;
.PHONY: install-newlib install-newlib-force
install-newlib: stamps/install-newlib
install-newlib-force stamps/install-newlib: stamps/build-newlib
cd build/newlib && \
$(MAKE) install
[ -d stamps ] || mkdir stamps
touch stamps/install-newlib;
.PHONY: clean-newlib
clean-newlib:
rm -rf build/newlib stamps/*-newlib newlib-*
.PHONY: realclean-newlib
realclean-newlib: clean-newlib
rm downloads/$(NEWLIB_ARCHIVE)
################ BINUTILS ################
##.PHONY: download-binutils download-binutils-force
##download-binutils: downloads/$(BINUTILS_ARCHIVE)
##download-binutils-force downloads/$(BINUTILS_ARCHIVE):
## [ -d downloads ] || mkdir downloads ;
## cd downloads && curl -LO $(BINUTILS_URL)
##.PHONY: extract-binutils extract-binutils-force
##extract-binutils: stamps/extract-binutils
##extract-binutils-force stamps/extract-binutils: downloads/$(BINUTILS_ARCHIVE)
## @(t1=`openssl md5 $< | cut -f 2 -d " " -` && \
## [ "$$t1" = "$(BINUTILS_MD5)" ] || \
## ( echo "Bad Checksum! Please remove the following file and retry: $<" && false ))
## tar -jxf $< ;
## [ -d stamps ] || mkdir stamps ;
## touch stamps/extract-binutils;
##.PHONY: patch-binutils patch-binutils-force
##patch-binutils: stamps/patch-binutils
##patch-binutils-force stamps/patch-binutils: stamps/extract-binutils stamps/extract-avr32patches
## pushd binutils-$(BINUTILS_VERSION) ; \
## for f in ../source/avr32/binutils/*.patch; do \
## patch -N -p0 <$${f} ; \
## done ; \
## popd ; \
## [ -d stamps ] || mkdir stamps
## touch stamps/patch-binutils;
##.PHONY: regen-binutils regen-binutils-force
##regen-binutils: stamps/regen-binutils
##regen-binutils-force stamps/regen-binutils: stamps/patch-binutils stamps/install-supp-tools
## pushd binutils-$(BINUTILS_VERSION) ; \
## "$(SUPP_PREFIX)/bin/aclocal" -I config ; \
## "$(SUPP_PREFIX)/bin/autoconf" ; \
## "$(SUPP_PREFIX)/bin/automake" ; \
## "$(SUPP_PREFIX)/bin/autoheader" ; \
## for dir in bfd opcodes binutils gas ld; do \
## pushd $$dir ; \
## "$(SUPP_PREFIX)/bin/autoconf"; \
## "$(SUPP_PREFIX)/bin/automake"; \
## "$(SUPP_PREFIX)/bin/autoheader"; \
## popd ; \
## done; \
## popd; \
## [ -d stamps ] || mkdir stamps ;
## touch stamps/regen-binutils;
##.PHONY: build-binutils build-binutils-force
##build-binutils: stamps/build-binutils
##build-binutils-force stamps/build-binutils: stamps/regen-binutils stamps/install-supp-tools
## cd binutils-$(BINUTILS_VERSION) ; \
## ./configure --enable-maintainer-mode \
## --prefix="$(PREFIX)" --target=$(TARGET) --disable-nls \
## --disable-shared --disable-werror \
## --with-sysroot="$(PREFIX)/$(TARGET)" --with-bugurl=$(BUG_URL) && \
## $(MAKE) all-bfd TARGET-bfd=headers; \
## rm bfd/Makefile; \
## make configure-bfd; \
## $(MAKE)
## [ -d stamps ] || mkdir stamps ;
## touch stamps/build-binutils;
##.PHONY: install-binutils install-binutils-force
##install-binutils: stamps/install-binutils
##install-binutils-force stamps/install-binutils: stamps/build-binutils
## cd binutils-$(BINUTILS_VERSION) && \
## $(MAKE) installdirs install-host install-target
## [ -d stamps ] || mkdir stamps ;
## touch stamps/install-binutils;
##.PHONY: clean-binutils
##clean-binutils:
## rm -rf build/binutils stamps/*-binutils binutils-*
##.PHONY: realclean-binutils
##realclean-binutils: clean-binutils
## rm downloads/$(BINUTILS_ARCHIVE)
########## DFU PROGRAMMER ###########
.PHONY: download-dfu download-dfu-force
download-dfu: downloads/$(DFU_ARCHIVE)
download-dfu-force downloads/$(DFU_ARCHIVE):
[ -d downloads ] || mkdir downloads ;
cd downloads && curl -LO $(DFU_URL)
.PHONY: extract-dfu extract-dfu-force
extract-dfu: stamps/extract-dfu
extract-dfu-force stamps/extract-dfu: downloads/$(DFU_ARCHIVE)
@(t1=`openssl md5 $< | cut -f 2 -d " " -` && \
[ "$$t1" = "$(DFU_MD5)" ] || \
( echo "Bad Checksum! Please remove the following file and retry: $<" && false ))
tar -zxf $< ;
[ -d stamps ] || mkdir stamps ;
touch stamps/extract-dfu;
.PHONY: build-dfu build-dfu-force
build-dfu: stamps/build-dfu
build-dfu-force stamps/build-dfu: stamps/extract-dfu
mkdir -p build/dfu-programmer && cd build/dfu-programmer && \
../../dfu-programmer-$(DFU_VERSION)/configure --prefix="$(PREFIX)" && \
$(MAKE) -j$(PROCS)
[ -d stamps ] || mkdir stamps
touch stamps/build-dfu;
.PHONY: install-dfu install-dfu-force
install-dfu: stamps/install-dfu
install-dfu-force stamps/install-dfu: stamps/build-dfu
cd build/dfu-programmer && \
$(MAKE) install
[ -d stamps ] || mkdir stamps
touch stamps/install-dfu;
.PHONY: clean-dfu
clean-dfu:
rm -rf build/dfu stamps/*-dfu dfu-*
.PHONY: realclean-dfu
realclean-dfu: clean-dfu
rm downloads/$(DFU_ARCHIVE)
################ Bootstrap GCC ################
.PHONY: download-gcc download-gcc-force
download-gcc: downloads/$(GCC_ARCHIVE)
download-gcc-force downloads/$(GCC_ARCHIVE):
[ -d downloads ] || mkdir downloads ;
cd downloads && curl -LO $(GCC_URL)
.PHONY: extract-gcc extract-gcc-force
extract-gcc: stamps/extract-gcc
extract-gcc-force stamps/extract-gcc: downloads/$(GCC_ARCHIVE)
@(t1=`openssl md5 $< | cut -f 2 -d " " -` && \
[ "$$t1" = "$(GCC_MD5)" ] || \
( echo "Bad Checksum! Please remove the following file and retry: $<" && false ))
tar -jxf $< ;
[ -d stamps ] || mkdir stamps ;
touch stamps/extract-gcc;
.PHONY: patch-gcc patch-gcc-force
patch-gcc: stamps/patch-gcc
patch-gcc-force stamps/patch-gcc: stamps/extract-gcc stamps/extract-avr32patches
pushd gcc-$(GCC_VERSION) ; \
for f in ../source/avr32/gcc/*.patch; do \
patch -N -p0 <$${f} ; \
done ; \
popd ;
[ -d stamps ] || mkdir stamps
touch stamps/patch-gcc;
CFLAGS_FOR_TARGET="-ffunction-sections -fdata-sections \
-fomit-frame-pointer -DPREFER_SIZE_OVER_SPEED -D__OPTIMIZE_SIZE__ -g \
-Os -fno-unroll-loops"
.PHONY: build-gcc build-gcc-force
build-gcc: stamps/build-gcc
build-gcc-force stamps/build-gcc: stamps/install-binutils stamps/patch-gcc
mkdir -p build/gcc && cd build/gcc && \
pushd ../../gcc-$(GCC_VERSION) ; \
make clean ; \
popd ; \
../../gcc-$(GCC_VERSION)/configure --prefix="$(PREFIX)" \
--target=$(TARGET) --enable-languages="c" --with-gnu-ld \
--with-gnu-as --with-newlib --disable-nls --disable-libssp \
--with-dwarf2 --enable-sjlj-exceptions \
--enable-version-specific-runtime-libs --disable-libstdcxx-pch \
--disable-shared \
--with-build-time-tools="$(PREFIX)/$(TARGET)/bin" \
--enable-cxx-flags=$(CFLAGS_FOR_TARGET) \
--with-sysroot="$(PREFIX)/$(TARGET)" \
--with-build-sysroot="$(PREFIX)/$(TARGET)" \
--with-build-time-tools="$(PREFIX)/$(TARGET)/bin" \
CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET) \
LDFLAGS_FOR_TARGET="--sysroot=\"$(PREFIX)/$(TARGET)\"" \
CPPFLAGS_FOR_TARGET="--sysroot=\"$(PREFIX)/$(TARGET)\"" \
--with-bugurl=$(BUG_URL) \
--with-pkgversion=$(PKG_VERSION) && \
$(MAKE) -j$(PROCS)
[ -d stamps ] || mkdir stamps
touch stamps/build-gcc;
.PHONY: install-gcc install-gcc-force
install-gcc: stamps/install-gcc
install-gcc-force stamps/install-gcc: stamps/build-gcc
cd build/gcc && \
$(MAKE) installdirs install-target && \
$(MAKE) -C gcc install-common install-cpp install- install-driver install-headers install-man
[ -d stamps ] || mkdir stamps
touch stamps/install-gcc;
.PHONY: clean-gcc
clean-gcc:
rm -rf build/gcc stamps/*-gcc gcc-*
.PHONY: realclean-gcc
realclean-gcc: clean-gcc
rm downloads/$(GCC_ARCHIVE)
################ Final GCC ################
.PHONY: build-final-gcc build-final-gcc-force
build-final-gcc: stamps/build-final-gcc
build-final-gcc-force stamps/build-final-gcc: stamps/install-binutils stamps/install-gcc stamps/install-newlib stamps/patch-gcc
mkdir -p build/final-gcc && cd build/final-gcc && \
pushd ../../gcc-$(GCC_VERSION) ; \
make clean ; \
popd ; \
../../gcc-$(GCC_VERSION)/configure --prefix=$(PREFIX) \
--target=$(TARGET) $(DEPENDENCIES) --enable-languages="c,c++" --with-gnu-ld \
--with-gnu-as --with-newlib --disable-nls --disable-libssp \
--with-dwarf2 --enable-sjlj-exceptions \
--enable-version-specific-runtime-libs --disable-libstdcxx-pch \
--disable-shared --enable-__cxa_atexit \
--with-build-time-tools=$(PREFIX)/$(TARGET)/bin \
--enable-cxx-flags=$(CFLAGS_FOR_TARGET) \
--with-sysroot=$(PREFIX)/$(TARGET) \
--with-build-sysroot=$(PREFIX)/$(TARGET) \
--with-build-time-tools=$(PREFIX)/$(TARGET)/bin \
CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET) \
LDFLAGS_FOR_TARGET="--sysroot=$(PREFIX)/$(TARGET)" \
CPPFLAGS_FOR_TARGET="--sysroot=$(PREFIX)/$(TARGET)" \
--with-bugurl=$(BUG_URL) \
--with-pkgversion=$(PKG_VERSION) && \
$(MAKE) -j$(PROCS)
[ -d stamps ] || mkdir stamps
touch stamps/build-final-gcc;
.PHONY: install-final-gcc install-final-gcc-force
install-final-gcc: stamps/install-final-gcc
install-final-gcc-force stamps/install-final-gcc: stamps/build-final-gcc
cd build/final-gcc && \
$(MAKE) installdirs install-target && \
$(MAKE) -C gcc install-common install-cpp install- install-driver install-headers install-man
[ -d stamps ] || mkdir stamps
touch stamps/install-final-gcc;
.PHONY: clean-final-gcc
clean-final-gcc: clean-gcc
rm -rf build/final-gcc stamps/*-final-gcc
.PHONY: realclean-final-gcc
realclean-final-gcc: realclean-gcc
########## GDB ###########
.PHONY: download-gdb download-gdb-force
download-gdb: downloads/$(GDB_ARCHIVE)
download-gdb-force downloads/$(GDB_ARCHIVE):
[ -d downloads ] || mkdir downloads ;
cd downloads && curl -LO $(GDB_URL)
.PHONY: extract-gdb extract-gdb-force
extract-gdb: stamps/extract-gdb
extract-gdb-force stamps/extract-gdb: downloads/$(GDB_ARCHIVE)
@(t1=`openssl md5 $< | cut -f 2 -d " " -` && \
[ "$$t1" = "$(GDB_MD5)" ] || \
( echo "Bad Checksum! Please remove the following file and retry: $<" && false ))
tar -jxf $< ;
[ -d stamps ] || mkdir stamps ;
touch stamps/extract-gdb;
.PHONY: patch-gdb patch-gdb-force
patch-gdb: stamps/patch-gdb
patch-gdb-force stamps/patch-gdb: stamps/extract-gdb stamps/extract-avr32patches
pushd gdb-$(GDB_VERSION) ; \
for f in ../source/avr32/gdb/*.patch; do \
patch -N -p0 <$${f} ; \
done ; \
popd ; \
[ -d stamps ] || mkdir stamps
touch stamps/patch-gdb;
.PHONY: regen-gdb regen-gdb-force
regen-gdb: stamps/regen-gdb
regen-gdb-force stamps/regen-gdb: stamps/patch-gdb stamps/install-supp-tools
pushd gdb-$(GDB_VERSION) ; \
"$(SUPP_PREFIX)/bin/aclocal" -I config ; \
"$(SUPP_PREFIX)/bin/autoconf" ; \
"$(SUPP_PREFIX)/bin/automake" ; \
"$(SUPP_PREFIX)/bin/autoheader" ; \
for dir in bfd opcodes gdb; do \
pushd $$dir ; \
echo "JESS 1: $$dir" >&2 ; \
"$(SUPP_PREFIX)/bin/autoconf"; \
"$(SUPP_PREFIX)/bin/automake"; \
"$(SUPP_PREFIX)/bin/autoheader"; \
echo "JESS 2: $$dir" >&2 ; \
popd ; \
done; \
popd; \
[ -d stamps ] || mkdir stamps ;
touch stamps/regen-gdb;
.PHONY: build-gdb build-gdb-force
build-gdb: stamps/build-gdb
build-gdb-force stamps/build-gdb: stamps/regen-gdb stamps/install-supp-tools
echo "JESS 3" >&2 ; \
mkdir -p build/gdb && cd build/gdb && \
../../gdb-$(GDB_VERSION)/configure --prefix="$(PREFIX)" --target=$(TARGET) --disable-werror && \
$(MAKE) -j$(PROCS)
$(MAKE) installdirs install-host install-target
[ -d stamps ] || mkdir stamps
touch stamps/build-gdb;
.PHONY: install-gdb install-gdb-force
install-gdb: stamps/install-gdb
install-gdb-force stamps/install-gdb: stamps/build-gdb
cd build/gdb && \
$(MAKE) install
[ -d stamps ] || mkdir stamps
touch stamps/install-gdb;
.PHONY: clean-gdb
clean-gdb:
rm -rf build/gdb stamps/*-gdb gdb-*
.PHONY: realclean-gdb
realclean-gdb: clean-gdb
rm downloads/$(GDB_ARCHIVE)
################ NON-WORKING/NON-ADJUSTED TARGETS ################
gcc-optsize-patch: gcc-$(GCC_VERSION)-$(CS_BASE)/
pushd gcc-$(GCC_VERSION)-$(CS_BASE) ; \
patch -N -p1 < ../patches/gcc-optsize.patch ; \
popd ;
gmp: gmp-$(CS_BASE)/ sudomode
sudo -u $(SUDO_USER) mkdir -p build/gmp && cd build/gmp ; \
pushd ../../gmp-$(CS_BASE) ; \
make clean ; \
popd ; \
sudo -u $(SUDO_USER) ../../gmp-$(CS_BASE)/configure --disable-shared && \
sudo -u $(SUDO_USER) $(MAKE) -j$(PROCS) all && \
$(MAKE) install
mpc: mpc-$(MPC_VERSION)/ sudomode
sudo -u $(SUDO_USER) mkdir -p build/gmp && cd build/gmp ; \
pushd ../../mpc-$(MPC_VERSION) ; \
make clean ; \
popd ; \
sudo -u $(SUDO_USER) ../../mpc-$(MPC_VERSION)/configure --disable-shared && \
sudo -u $(SUDO_USER) $(MAKE) -j$(PROCS) all && \
$(MAKE) install
mpc-$(MPC_VERSION) : $(LOCAL_BASE)/mpc-$(CS_VERSION).tar.bz2
ifeq ($(USER),root)
sudo -u $(SUDO_USER) tar -jxf $<
else
tar -jxf $<
endif
mpfr: gmp mpfr-$(CS_BASE)/ sudomode
sudo -u $(SUDO_USER) mkdir -p build/mpfr && cd build/mpfr && \
pushd ../../mpfr-$(CS_BASE) ; \
make clean ; \
popd ; \
sudo -u $(SUDO_USER) ../../mpfr-$(CS_BASE)/configure LDFLAGS="-Wl,-search_paths_first" --disable-shared && \
sudo -u $(SUDO_USER) $(MAKE) -j$(PROCS) all && \
$(MAKE) install
cross-gdb: gdb-$(CS_BASE)/
mkdir -p build/gdb && cd build/gdb && \
pushd ../../gdb-$(CS_BASE) ; \
make clean ; \
popd ; \
../../gdb-$(CS_BASE)/configure --prefix="$(PREFIX)" --target=$(TARGET) --disable-werror && \
$(MAKE) -j$(PROCS) && \
$(MAKE) installdirs install-host install-target && \
mkdir -p "$(PREFIX)/man/man1" && \
cp ../../gdb-$(CS_BASE)/gdb/gdb.1 "$(PREFIX)/man/man1/arm-none-eabi-gdb.1"